A residential chain-link run is fabric, framework, fittings, and the gates that land in it. We quote galvanized fabric, color-coated fabric, framework, fittings, ties, caps, tension wire, slats and screens, and chain-link gate hardware. The takeoff has full residential galvanized takeoffs at 4 ft, 5 ft, and 6 ft.

Fabric

Galvanized chain-link fabric is quoted as galvanized before weave (GBW) or galvanized after weave (GAW), in Class I and Class II. Common gauges are 6, 9, 11, 11.5, and 12.5. Mesh is commonly 3/8 in. to 2-3/8 in. Heights run from 18 in. through tall commercial, and up to 20 ft on special order. For a typical residential yard, tell us whether the run is 4 ft, 5 ft, or 6 ft, and the mesh and gauge if the specification calls for them. Zinc coatings are commonly 1.2 oz or 2.0 oz.

Framework and fittings

Framework is quoted in residential and commercial grades, galvanized or color-coated, for line, terminal, and gate frames. Common outside diameters are 1-3/8 in. to 4 in., with SS20 and SS40 weights commonly quoted. Fittings include tension bands, brace bands, rail ends, boulevards, loop caps, dome caps, ties, and clips, sized to the pipe. Tension wire is quoted for the bottom of the run when the job calls for it.

Gates, color, and privacy

Chain-link walk and double gates are quoted to the opening and the fence height, with hinges, latches, and, on doubles, a drop rod and center stop as the takeoff requires. Color-coated fabric and framework are quoted when a coated run is specified. Privacy slats, pre-slatted fabric, and windscreen are quoted separately when the job wants a more private face.

What to send with the quote

Include the height, the total footage, the number of ends and corners, each gate width, and whether the fabric is galvanized or color-coated. Add the gauge, mesh, and pipe size when you already have a specification. Lead times vary with demand and, for gates, with size — we confirm timing with your quote.

All resources