
Resources
Questions
Answers about buying, quotes, accounts, delivery, and pickup, compiled from the questions already on this site.
Buying from the yard
Who can buy from Frontier Fence Supply?
Contractors, builders, landscapers, and property managers are our main customers, and homeowners are welcome too. Request a quote or pick up at the yard. Contractors and other professional buyers can also open an account.
How do I get current pricing?
Request a quote for current pricing, or contractors can open an account for ongoing quotes.
How fast do you return quotes?
We return quotes the same business day.
Where do you deliver?
We deliver to job sites across the states we serve, including metros such as Nashville, Louisville, Knoxville, Huntsville, Atlanta, Memphis, and Cincinnati. Pickup is also available at the Gallatin yard Monday through Friday, 7:00 a.m. to 3:00 p.m. Not sure we reach your job site? Call or request a quote.
Fence materials
What fence materials do you sell?
We stock wood, vinyl, aluminum, and chain link, along with farm and ranch materials, gates, and hardware. Request a quote for the styles and sizes on your job.
Quotes
How long does a quote or a gate take?
We return quotes the same business day. Special-order items may take longer to price. Lead times vary with demand and, for gates, with size — we confirm timing with your quote.
Delivery and pickup
Can I pick up materials at the yard?
Yes. Pickup is at 400 Belvedere Dr N, Unit B, Gallatin, TN 37066, Monday through Friday, 7:00 a.m. to 3:00 p.m. Call or email so we can have your order ready when you arrive.
How long does it take to get materials?
Lead times vary with demand and, for gates, with size — we confirm timing with your quote.
Can I return materials?
All sales final. No returns. Please inspect your order at delivery and report any damage or shortages within 24 hours.
Contractor accounts
Who can open a contractor account?
Licensed or established fence contractors, general contractors, builders, landscapers, and property managers buying for business use. Homeowners do not need an account — request a quote or pick up at the yard.
When is payment due?
Payment is due on delivery. Approved accounts may apply for Net 15 or Net 30 terms, subject to credit approval. We accept cash, check, ACH and credit cards.
How do I get pricing after I apply?
Once your account is in motion, request a quote for current pricing. We will price the list the same business day.
Wood
Do you sell wood fence materials?
Yes. We quote cedar and treated pine pickets, rails, posts, and related parts for wood fence jobs.
Can wood fence materials be adjusted for a job?
Yes. Tell us the heights, lengths, and any gates or grade changes on the quote request, and we will quote the pieces that fit the run.
Do your wood fencing materials come with warranties?
Wood is not typically covered by a manufacturer warranty, because wood is expected to weather. We can discuss finishes and species when we quote the job.
Vinyl
Do you sell vinyl fence materials?
Yes. We quote vinyl privacy, picket, and rail sections, posts, caps, gates, and hardware. White, tan, adobe, and the Homewood series are available in privacy styles. Picket and ranch rail are quoted in white.
Can vinyl fence materials be adjusted for a job?
Yes. Our shop can route posts and cut panels for corners, ends, angles, slopes, and short sections. Include the layout with your quote request.
What vinyl gate sizes do you quote?
We quote 4, 5, and 6 ft wide single gates, and 8 ft and 10 ft double gates.
Chain link
How long are the chain link posts?
Post length is fence height plus 2 ft for fences under 6 ft, and height plus 3 ft at 6 ft and taller. A 4 ft fence uses 6 ft posts, a 5 ft fence uses 7 ft posts, and a 6 ft fence uses 9 ft posts. That applies to both line and terminal posts.
What size are the line posts?
Line posts are 1-5/8" for every height below 8 ft. At 8 ft, line posts are 2".
Aluminum
Do you sell aluminum fence materials?
Yes. We quote aluminum panels, posts, gates, and hardware, including three-rail flat-top styles in 4' and 5' heights.
Can aluminum fence materials be adjusted for a job?
Yes. Note the style, height, color, and any gates or special openings on the quote request, and we will quote the panels and parts for that layout.
Do aluminum fence materials carry a manufacturer warranty?
Ask us about the manufacturer's written warranty when we quote the material. Terms vary by product.
How can I estimate how much aluminum fence I need?
Add up the run lengths and subtract buildings and gate openings. Aluminum is typically quoted by the panel or section, not only by the foot. You can also use our Material Takeoff to build a list before you request a quote.
What gate hardware do you quote for aluminum?
Self-closing aluminum hinges are sold 2 per pack, 1 pack per gate leaf (a double gate gets two packs). We quote one latch per gate. Latches include the Keystone X2 one-sided external mount latch and the Trident Safe Signal magnetic pool latch. Tell us which latch the job needs.
What aluminum gate sizes do you quote?
We quote 4, 5, and 6 ft wide single gates, and 8 ft and 10 ft double gates.
Farm and ranch
What farm and ranch materials do you sell?
We quote 1x6x16 rough-cut farm boards, 4x4x7 square farm posts, and 2x4 welded wire in 4 ft and 5 ft heights.
Do you carry farm gates?
Farm gates are custom built in 4 ft single and 8 or 10 ft double.
How should I request a farm materials quote?
Send the footage, how many 4x4x7 posts you need or the spacing you plan to use, the number of 1x6x16 boards, and whether the wire should be 4 ft or 5 ft. We will confirm roll length with the quote.
Wood
Should fence posts be ground-contact treated?
If a post will be set in soil or concrete, it should be quoted as ground-contact treated lumber, not as an above-ground or 'treated' generic. Retention (for example 0.40 or 0.60 PCF, as the specification requires) matters more than the word treated. Rails and pickets that stay off the soil are often a different use category.
When should I use cedar instead of treated pine pickets?
Cedar is commonly quoted when the face is highly visible, when a pre-stained finish is part of the job, or when the specification calls for it. Treated southern yellow pine is the usual workhorse for posts, rails, and many privacy pickets in this region. The two are often mixed — treated posts and rails with cedar pickets — as long as the takeoff says so.
How many pickets are in 100 feet of privacy versus shadowbox?
A tight 1x6 privacy face is often counted from the actual board width, commonly around 5.5 inches, which is why a 100-foot run can land near 220 boards. Shadowbox and board-on-board use more boards because of the second face or the overlap. Send the pattern and the reveal with the quote request rather than assuming a single multiplier.
Do I need 4x6 or 6x6 posts at a gate?
Many walk gates hang successfully on a stout 4x4 or a 4x6, depending on the leaf weight and height. Wide or heavy drive leaves are often quoted with 4x6 or 6x6 posts, or with a steel post, so the hinge post does not move. Tell us the opening, the height, and whether the leaf is wood-filled, and we will quote the post size with the frame and hardware.
Steel posts or wood posts on a wood fence?
Steel posts are quoted when the job wants a slender or hidden post, when a wood post at grade has been a problem, or when the specification calls for them. They need the matching screws or brackets. A treated 4x4 or 4x6 remains the common post on most residential wood runs we quote.
What post spacing should I use with 2x4 rails?
Eight feet on center is a common spacing for 2x4 rails on residential privacy. Six or seven feet is used when the rail is spanning a heavier cap, a taller face, or a more exposed site. The rail length you buy should match the spacing you actually set.
How do I account for slope on a wood run?
Wood fence is usually stepped at the post, with pickets following each bay, or racked if the specification allows the rails to follow grade. Stepping changes post heights and picket lengths at the transition. A sketch or elevation with the grade change marked is enough for us to quote; we will not assume a racked run unless you say so.
Chain link
What is the difference between residential and commercial chain link?
The difference is the specification — post and rail size, fabric gauge and mesh, height, and often the brace and fitting schedule — not a single brand of fabric. Tell us the use and any written specification so we can quote the right grade.
How far apart are line posts?
Eight to ten feet on center is common on residential work. Ten feet is a frequent planning figure for a 4-foot run. Taller or heavier fabric, high wind, or a written specification may require tighter spacing.
Do I need a top rail and tension wire?
A top rail is common on residential runs. Tension wire is often used at the bottom, and sometimes at the top when a rail is not specified. The quote should say which the job is using.
Can I add privacy slats later?
Often yes, if the fabric mesh and the post-and-rail schedule will accept them. It is cleaner to quote slats or a windscreen with the original run so color and method are planned. Existing fabric may or may not take the slat you want.
What height should I specify?
Four feet is common on residential lots; 5 and 6 feet are also quoted. Commercial and industrial runs are often 6, 8, 10, or 12 feet. Local rules and the use of the fence should drive the height.
How do I get a chain-link gate quoted?
Call out the opening width, the hanging side, and whether it is a walk or drive gate. Walk gates are often about 4 feet. Drive openings should be measured, not assumed. Hardware is quoted with the gate.
Can chain-link materials be delivered?
Yes. We deliver across the states we serve, and you can pick up at the yard Monday through Friday, 7:00 a.m. to 3:00 p.m.
Vinyl
What brand of vinyl do you quote?
We quote vinyl. the vinyl manufacturer is a U.S. manufacturer with a plant in Surgoinsville, Tennessee. Style names are the published vinyl fence style names. Official specifications and the warranty are on site.
What is a common post spacing for vinyl privacy?
Eight feet on center is a common planning figure for vinyl solid privacy, and a common privacy section is 6 feet high by 8 feet wide. Picket styles may use a different section width and 4x4 posts. Confirm the style on the quote.
Do vinyl rails need stiffeners?
Metal stiffeners are commonly used, especially in the bottom rail. On the Homewood series, stiffeners are required in all rails, and Homewood privacy also requires a mid-rail. Call out the color series so we can quote the right reinforcement.
Will vinyl work on a slope?
Some vinyl privacy sections can follow a modest slope. Steeper grade changes, steps, or a racked run need a takeoff. Send the grade with the quote request.
Who warrants the vinyl?
the vinyl manufacturer, not Frontier Fence Supply, warrants the vinyl fence and rail profiles it manufactures. A limited lifetime warranty may apply for a residential purchaser and a 30-year warranty for a commercial purchaser, subject to its current written terms. Read the official warranty for coverage, registration, and exclusions.
Do you fabricate vinyl in the yard?
Yes. In the shop we do custom post routing for corners, ends, and angles; stair-step and sloped routing; panels cut down to size; and custom-width gates. Send the layout with your quote request.
How do I get a vinyl gate quoted?
Call out the style, color, opening width, and hanging side. Walk gates are often about 4 feet. Gates are built to match the fence style and are confirmed with the quote, including timing.
How do I get pricing?
Request a quote for current pricing, or open a contractor account. We return quotes the same business day. Special-order items may take longer to price.
Aluminum
What color is commonly quoted?
Black is a common color we quote. Other colors are available to quote when you specify them.
Is a pool-style panel the same as a code-compliant pool barrier?
No. A pool-style panel and gate can be quoted to a specification, but we do not certify that a finished fence meets a pool code. Confirm height, spacing, and latch requirements with the authority having jurisdiction.
Can aluminum panels follow a slope?
Many residential panels are rackable through a modest grade. Steeper slopes may need stepped sections or a different layout. Send the grade with the quote request.
What panel width should I plan on?
Six feet is a common residential panel width and a common planning figure for post spacing. Confirm the series you want; commercial or custom panels may differ.
How do I get a gate quoted?
Call out the leaf width, hanging side, and whether the gate must be self-closing and self-latching. Walk leaves are often about 4 feet. Drive openings should be measured.
Is this Frontier aluminum?
Yes. Aluminum fence materials are quoted under the Frontier label. Request a quote for current pricing.
Can you deliver aluminum panels?
Yes. We deliver across the states we serve, and pickup is available at the yard Monday through Friday, 7:00 a.m. to 3:00 p.m.
Gates and hardware
How long does a gate take?
Lead times vary with demand and, for gates, with size — we confirm timing with your quote. We return quotes the same business day.
What width should a walk gate be?
About 4 feet is a common planning width. Measure anything that has to pass through, including equipment, and tell us if a wider leaf is required.
When do I need a slide gate instead of a swing gate?
When the leaf cannot swing — because of a slope, a sidewalk, a short driveway, or a specification. Slide and cantilever gates need accurate site dimensions.
Do you quote gate operators?
Yes, operators and related access equipment can be quoted with the opening. We will need the clear opening, the gate type, and what power is available on site.
What hardware do I need for a double-swing driveway?
Hinges sized to each leaf, a latch, and usually a drop rod or cane bolt at the center, plus posts that can hold the load. Send the clear opening with the quote request.
Can a gate match my wood, vinyl, aluminum, or chain-link fence?
Yes. Say which material line and style the gate has to match, including color or coating. Vinyl gates are quoted to match vinyl styles.
Farm and ranch
How many posts do I need for 1/4 mile of field fence?
On a straight run with no gates, 12-foot spacing is about 109 line posts plus two end posts, or 111 posts in total. Eight-foot spacing is 166 total posts; 10-foot is 133; 16-foot is about 84. Add posts and H-braces for corners and gates. The chart below lists the same figures.
How many rolls of field fence cover a mile?
At 330 feet per roll, a common agricultural roll length, a mile is about 16 rolls and a quarter mile is about 4. Confirm the roll length you want on the quote.
Should I use T-posts or wood posts?
T-posts are a common line post on woven field fence. Treated wood or heavier posts are typically used at ends, corners, and gates, and can be used as line posts when the specification calls for them. Tell us which way you want the run built.
Do I need H-braces?
Yes, on a tensioned woven or stranded run. Plan them at ends, corners, and gate openings. A takeoff should show brace locations, not only a post count.
What size farm gate should I plan?
A 12-foot gate is a common planning width on field fence. Measure the equipment that has to pass and tell us if you need a wider leaf or a double opening.
Do you design electric-fence systems?
No. We can quote typical energizers and accessories as farm supply. We do not design or certify electric-fence systems.
How do I get a long run quoted?
Send the distance, the wire type, post spacing, corner and gate counts, and the job city. You can start from the material takeoff, then edit the list. We return quotes the same business day.