Aluminum fence is a panel system. The panel style, the height, the post, the cap, and the gate should belong to the same family. We quote 2-rail and 3-rail panels, pool-style sections, puppy-picket and tight-spacing panels, and commercial or industrial ornamental panels, with the posts, caps, and hardware that go with them.
If you already know the height and the footage, you can start with the material takeoff for 4 ft or 5 ft Three Rail Flat Top Aluminum, then edit the list and send it for a quote.
Three Rail Flat Top Aluminum
Three Rail Flat Top Aluminum is the residential ornamental panel we take off at 4 ft and 5 ft. A typical panel width is 6 ft. The same catalog family also includes 2-rail panels and, when specified, other heights. Black is a common color we quote; other colors are quoted as available. Tell us the color when you request a quote.
Posts, gates, and slope
Line, corner, end, and gate posts are sized to the panel system and the footing. Caps and small fittings are quoted to match the post. Common walk-gate widths are 4 ft and 5 ft; drive widths are quoted to the opening. Custom openings and rackable kits are used when the grade or the width is not a stock leaf. An in-field racking kit is quoted when a rackable gate will be built on the job.
Pool-style panels
Pool-style panels are quoted when a pool enclosure is specified. Picket spacing is intended for common pool-code layouts, but this style name is not a certification that the finished fence meets a pool code. Heights follow the enclosure specification, and self-closing hinges and top-pull pool latches are quoted when the job calls for them. Local code still governs latches and openings.
What to send with the quote
Include the style, the height, the total footage, the number of ends and corners, and each gate width — and say if a gate sits on a corner. Call out slope, a pool enclosure, or a commercial specification. Lead times vary with demand and, for gates, with size — we confirm timing with your quote.
